Posted by Jim Guerber on January 30, 2008 at 17:23:20:
In Reply to: Re: EMAIL Printer Log posted by greg on January 30, 2008 at 16:39:17:
Port 25 is incorrectly reported as port 6400 in the message because Hex 0x0019 is interpreted as 0x1900, which is 6400.
Poor code in Comet Winsock Gateway. I think this has been fixed in current releases.
What program are you using to print to the email printer?
The next message from the server would be a 220 as in the following.....
Signature Systems Email Printer Started Wed, 09 Jan 2008 08:05:52 -1000 -0000
GMT time will be used for the date
WEOL 1
+OK CRLF will be appended to write records.
TIMEOUT 30
+OK Timeout changed to 30 seconds
CONNECT smtp-server.hawaii.rr.com mail
+OK Connect 71.74.56.22 on port 25
220 hrndva-omtalb.mail.rr.com ESMTP Welcome to Road Runner. WARNING: *** FOR AUTHORIZED USE ONLY! ***
EHLO smtp-server.hawaii.rr.com
250-hrndva-omtalb.mail.rr.com
250-HELP
250-VRFY
250-XREMOTEQUEUE
250-ETRN
250-PIPELINING
250-DSN
250-8BITMIME
250 SIZE 30996480
no auth needed
RCPT TO:jim@signature.net DATA This all goes according to RFC 821 (see link below). I think your exchange server is not talking to you. I cannot speculate about why.
Each file can be a maximum of 1MB in length Uploaded files will be purged from the server on a regular basis.
MAIL FROM:jim@signature.net
250 Sender
250 Recipient
354 Ok Send data ending with
Comet goes into a receive until that 220 or some numeric response comes back from the server or it times out (30 seconds).