Posted by Bob Pride on March 27, 2008 at 15:14:09:
I changed Cosw.ini on the server tto read lias pasted below. Now the compressed print works when printing from the server onto LP1 (the Ljet 4100) but printing from a workstation still results in 10 CPI printing. How do I get these setting to work on the workstations? The system is set up so worstation run the comet.exe on the server, so ther don't appear to be any Comet files on the workstation except the shortcut.
From COSW.INI
[Printer Fonts]
Font-0=Lucida Console, 12, 17, 0, 6
Font-1=Lucida Console, 12, 17, 0, 6
Font-2=Lucida Console, 12, 10, 0, 6
\\GRYPHON600SC\HP LaserJet 4100 PCL 6 Font-0=Lucida Console, 12, 17, 0, 6
pdfFactory Font-0=Lucida Console, 12, 17, 0, 6
pdfFactory Font-1=Lucida Console, 12, 17, 0, 6
pdfFactory Font-2=Lucida Console, 12, 10, 0, 6
Here is the global printer section from the INI file. There are no printers in the node sections.
[PRINTERS]
Printer = LP1,W,N,, \\GRYPHON600SC\HP LaserJet 4100 PCL 6,,;
Printer = LP2,W,N,, \\VOSTRO001\EPSONLQ1:RAW, FFCLOSE,; ! Epson 2090 on Vostro 200
Printer = LP3,W,N,, \\GRYPHON600SC\EPSON LQ-2090 ESC/P2:RAW, FFCLOSE,; ! Epson 2090 on server
Printer = LP4,W,N,, \\GRYPHON600SC\pdfFactory;
Each file can be a maximum of 1MB in length Uploaded files will be purged from the server on a regular basis.