Posted by Grant Foraker on May 03, 2010 at 12:12:34: Uploaded files: 4
Problem 1:
Two tab dialog created in VS2008. Yet another attempt using Howto9 to get a working tab program. Got farther last time (2 years or so back).
The tab line is being overwritten by one or both tabs at the start (see GIP1). Clicking on the visible piece of tab two shows tab 2 as it should be (see GIP2). Clicking on tab one shows tab one as it should be (see GIP3). Click again on Tab 2 and the screen is now scrambled (see GIP4). At this point tab 1 & 2 remain the same when toggled.
IDD.GIP, IDD.GIP.TAB1, and IDD.GIP.TAB2 are modeled after the Howto9 IDD's double checked with the Howto8 IDD's with VS2008. I think I have all the attribes the same.
Using the Debugger, GIP, GIP.TAB1 display properly and things go wrong when GIP.TAB2 appears. Since there's a delay between the display and the code position in the debugger I'm not getting a handle on what's mucked up.
Each file can be a maximum of 1MB in length Uploaded files will be purged from the server on a regular basis.