Posted by Barbara Brazil on September 07, 2005 at 09:19:33:
In Reply to: Novell NLM posted by Willie Klein on September 07, 2005 at 08:52:17:
Willie:
The NLM does not support products newer than Comet 2004. You can solve this problem by moving the security dongle and license.txt off of the NetWare machine and on to a Windows machine. The Windows machine will serve as the security server for the network. You may continue to use the NLM for your file server.
If you do this, you will need to add another Server= statement to your sysgen file for the new security server. In the Node= section you will refer to 2 servers for each profile: the "F" server will remain pointing to the NLM; the "S" server will point to the Windows machine. Also, be sure to actually delete the license.txt file from the NLM system. Its presence tells the NLM whether it is the security server or not and if it finds the file but no dongle, the NLM will not load. Also, you will have to unload the NLM before you can remove the dongle.
There's a mention of our decision not to add new products to the NLM in the 2004 document referenced below.
bb