Posted by Grant Foraker on December 14, 2005 at 13:58:49:
In Reply to: Re: AllowMaximize posted by Barbara Brazil on December 14, 2005 at 10:21:19:
bb:
All I needed was ...
Print "" ! Flush GDI command buffer
after the AllowMaximize=True
Thanks
==============================================================
That leaves a second problem that might be related. Over CometAnywhere, when I exit a dialog menu and enter an older QCRT program the cursor would dissappear sometimes and I'd have to click in the entry area to restore it. The old program does a CS, display's the BG, and then does a FG prompt, and sets the cursor for input.
When running CAW over my LAN the cursor would disappear about 50% of the time. Now it's there 100%.
When running CAW via PCAnywhere from a couple of customer's, I had a 75% failure rate. Now it's failing 100%.
Originally, the dialog menu was mouse only and I had a HideCursor at the beginning and a ShowCursor at the end. Later, I added a Edit Control so the user could type the selection instead of clicking. I removed the HideCursor but left the ShowCursor and part of the clean up before the RUN. The Entry Rectangle, if checked, displays. If the program is run from ready the cursor always appears.