Posted by Grant Foraker on March 26, 2008 at 06:54:18:
In Reply to: Where is COSW.INI? posted by Bob Pride on March 25, 2008 at 18:41:31:
Bob:
In my COSW.INI I have these fonts listed ...
[Printer Fonts]
Font-0=Lucida Console, 12, 17, 0, 6
Font-1=Lucida Console, 12, 17, 0, 6
Font-2=Lucida Console, 12, 10, 0, 6
Font-11=Lucida Console, 12, 11, 0, 6
Font-12=Lucida Console, 12, 12, 0, 6
Font-13=Lucida Console, 12, 13, 0, 6
Font-14=Lucida Console, 12, 14, 0, 6
Font-15=Lucida Console, 12, 15, 0, 6
Font-16=Lucida Console, 12, 16, 0, 6
Font-17=Lucida Console, 12, 17, 0, 6
Font-18=Lucida Console, 12, 18, 0, 6
Font-19=Lucida Console, 12, 19, 0, 6
Font-20=Lucida Console, 12, 20, 0, 6
pdfFactory Font-0=Lucida Console, 12, 17, 0, 6
pdfFactory Font-1=Lucida Console, 12, 17, 0, 6
pdfFactory Font-2=Lucida Console, 12, 10, 0, 6
12=Point size, 17=CPI, 0=weight, 6=LPI
0-2 are set from the "File/Set Printer Font" menu for the "[default]" printer. All "non RAW" printers will use these printer settings. RAW printers ignore these settings and will print whatever the printer's default settings are. Here's an example of the same printer being defined both ways.
[PRINTERS]
Printer = LP1,W ,N, ,\\SSASD00\HP LaserJet 4 Plus,,;
Printer = LPR,W ,N, ,\\SSASD00\HP LaserJet 4 Plus:RAW,,;
Font 11-20 I pasted into the INI so they'd be available for my programs to call easily.
The pdfFactory fonts are also set via "File/SetPrinter Font". This shows how you can have separate and different fonts assigned to individual printers. In my case I've used the same settings.
Each file can be a maximum of 1MB in length Uploaded files will be purged from the server on a regular basis.