Posted by Robert G Laurin on April 07, 2004 at 10:27:42:
Every once in a while, Comet gives a Device Inop on open of a Windows printer.
This happens with Windows printers configured as 'W', '?' and even in :RAW mode.
This will happen randomly after successfully using that printer all day. The only solution I found so far is to correct this, is to EXIT Comet and re-start it.
Sometimes (only sometimes) performing a PrintScreen (from Comet's drop-down menus) will correct that problem.
This has been tested on Comet 2002.320 and I checked all the documentation update to no avail.