Posted by Grant Foraker on April 23, 2004 at 10:38:25:
In Reply to: Re: Stand alone Comet Serve posted by Grant Foraker on April 08, 2004 at 08:20:54:
Here are some additional steps to the Loopback Adaptor.
1. Configure a static IP address for loopback connection such as
10.0.0.5 netmask 255.0.0.0
2. Change the binding order to the network connection
1). Right click the My Network Places->Properties 2). Click Advanced menu->Advanced Settings, change loopback connection to below to the local network connection you usually use.