Posted by Jim Guerber on Thu, 11 Sep 2003 12:03:33 :
-----Original Message-----
From: Jim Guerber [mailto:jim@signature.net]
Sent: Thursday, September 11, 2003 12:01 PM
To: 'Barbara Pragar'
Subject: RE: Spooler
Actually, I did not give up. I just now reproduced the error you were
seeing with the path ".\spl". I will investigate further. I think it has
something to do with the "current directory" changes we just made
recently.
Jim
-----Original Message-----
From: Barbara Pragar [mailto:pragarprogramming@fuse.net]
Sent: Thursday, September 11, 2003 9:15 AM
To: Jim Guerber
Subject: Re: Spooler
Hi,
I don't think my problem has anything to do with the ini file. I used
one of the node names from a computer that works on a computer that
doesn't work & it also did NOT work. I think something on certain
computers is causing the error. I put Comet 325 on their system last
week when I changed the spool path & the problem probably began then.
Barb
----- Original Message -----
From: Jim Guerber
To: 'Barbara
Sent: Wednesday, September 10, 2003 9:02 PM
Subject: RE: Spooler
Here is the directory section:
[DIRECTORIES]
;-----------------------------------------------------------------------
------
; Syntax Example:
-
;
-
; Directory
-
; Entry Type Directory's DOS path (upto 60 characters)
;
-
; 00 = L , c:\comet\rel\; local hard drive
-
; 01 = LR , D:\ram\; local memory drive
-
; 02 = S , \\fs1\sys\comet\dsk; NLM type directory
-
;-----------------------------------------------------------------------
------
01 = N ,.\REL\;
02 = N ,.\COS\;
03 = N ,.\UTL\;
04 = N ,.\CED\;
05 = n ,.\SPL\;
06 = n ,.\UTR\;
07 = n ,.\TMP\;
08 = N ,.\SEC\;
09 = n ,.\ALL\;
10 = n ,.\CVD\;
11 = n ,.\CVP\;
12 = N ,.\D\PSG\;
13 = n ,.\D\PRM\;
14 = n ,.\D\CUS\;
15 = n ,.\D\DSK\;
16 = n ,.\PHL\;
17 = n ,.\PHO\;
18 = n ,.\RPT\;
19 = n ,.\PRT\;
20 = n ,.\T\PHC\;
21 = L ,C:\COMET\RAM\;
22 = n ,.\OBJ\;
23 = n ,.\DMW\;
24 = n ,.\D\OLD\;
25 = n ,.\DLG\;
26 = N ,.\D\PHI;
27 = n ,.\WDL\;
28 = n ,.\T\PST\;
29 = n ,W:\FILES\RON;
30 = n ,W:\FILES\RON\RRM;
31 = n ,W:\FILES\RON\RSG;
33 = n ,W:\FILES\TXT;
34 = n ,.\D\SIB\;
35 = n ,.\ODBC;
; 36 = L ,c:\files\temp;
I do not see "j:\comet\spl\" anywhere!
Jim
-----Original Message-----
From: Barbara Pragar [mailto:pragarprogramming@fuse.net]
Sent: Wednesday, September 10, 2003 2:52 PM
To: Jim Guerber
Subject: Re: Spooler
here it is
----- Original Message -----
From: Jim Guerber
To: 'Barbara
Sent: Wednesday, September 10, 2003 8:50 PM
Subject: RE: Spooler
Are you sure? Send me the ini file again, I did not see it.
Jim
-----Original Message-----
From: Barbara Pragar [mailto:pragarprogramming@fuse.net]
Sent: Wednesday, September 10, 2003 1:47 PM
To: Jim Guerber
Subject: Re: Spooler
I think you misunderstood me. It is in the directory section as well as
the spool section.
Barb
----- Original Message -----
From: Jim Guerber
To: 'Barbara
Cc: forum@signature.net
Sent: Wednesday, September 10, 2003 12:49 PM
Subject: RE: Spooler
NO, Barb, J:\comet\spl\ must be in the [DIRECTORY] section as well as
the [SPOOL] section of the ini file as I said.
ALSO, the user must have access to the spool directory when running a
program that prints to the spool. That has to do with your Qmonitor
security settings if you are using blind passwords.
Jim
-----Original Message-----
From: Barbara Pragar [mailto:pragarprogramming@fuse.net]
Sent: Wednesday, September 10, 2003 4:19 AM
To: Jim Guerber
Subject: Re: Spooler
SSR isn't the only spool that doesn't work. We also found out that some
computers do work. Ex. Pat works but Sherry doesn't & they have the
same op system.
Also, I changed the SSR last night to see if making the path the same as
SPL would fix it. It didn't.
J:\comet is the directory that SPL is in and the startup directory.
Thanks,
Barb
PS I had Sherry turn off her virus checker and try to print to both SPX
& SSR & both got the error 81. Also I had 2 others try the spooler &
one worked & one didn't.
Help!!
----- Original Message -----
From: Jim Guerber
To: 'Barbara
Cc: 'Multiple
support'
Sent: Wednesday, September 10, 2003 2:43 AM
Subject: RE: Spooler
Barb,
Here is a snip of your ini file, It looks to me like you can only get to
the spool SSR because that is the only spool that is represented both in
the spooler section and the directories section.
Jim
Spool = SPL, J:\COMET\SPL\;
Spool = SCH, J:\COMET\SPL\;
Spool = SSR, .\SPL\;
Spool = SLP, J:\COMET\SPL\;
Spool = SPX, J:\COMET\SPL\;
Spool = SWS, J:\COMET\SPL\;
Spool = SME, J:\COMET\SPL\;
[DIRECTORIES]
;-----------------------------------------------------------------------
------
; Syntax Example:
-
;
-
; Directory
-
; Entry Type Directory's DOS path (upto 60 characters)
;
-
; 00 = L , c:\comet\rel\; local hard drive
-
; 01 = LR , D:\ram\; local memory drive
-
; 02 = S , \\fs1\sys\comet\dsk; NLM type directory
-
;-----------------------------------------------------------------------
------
01 = N ,.\REL\;
02 = N ,.\COS\;
03 = N ,.\UTL\;
04 = N ,.\CED\;
05 = n ,.\SPL\;
06 = n ,.\UTR\;
-----Original Message-----
From: Barbara Pragar [mailto:pragarprogramming@fuse.net]
Sent: Tuesday, September 09, 2003 2:33 PM
To: Jim Guerber
Subject: Re: Spooler
Hi,
Here is the ini file. I can't see anything wrong. If you go to the
spool #26, the old jobs are there but if I try to print to any of the
spools, I get an error 81
Thanks,
Barb
----- Original Message -----
From: Jim Guerber
To: pragarprogramming@fuse.net ; 'Multiple
Sent: Tuesday, September 09, 2003 5:40 PM
Subject: RE: Spooler
You must have the spool directory also accessed by the user as one of
her DABS. If you do not find the problem in your ini file and qmonitor
security setup, send them to us and we will help you.
Jim
-----Original Message-----
From: owner-support@signature.net [mailto:owner-support@signature.net]
On Behalf Of Barbara Pragar
Sent: Tuesday, September 09, 2003 11:27 AM
To: Multiple recipients of list support
Subject: Spooler
Hi,
I changed the location of my spool & now I get an error 81 when I try to
print to it. Help!
Thanks,
Barb