Posted by John Hoffmann on June 18, 2004 at 09:25:08:
In Reply to: C2003 vs Win2003 posted by John Hoffmann on June 17, 2004 at 06:44:41:
A followup to the last messsage. When trying to run Security server on the server, get the message An error occurred locating a Security Module. The module could not be identified connected to any parallel port. The operating system is windows server 2003. The hardware is HP LH4r Net server. The plug is on LPT1. Checking the LPT1 port in device manager shows ECP printer port(LPT1), Device type: Ports(COM & LPT), Mfg: (std prot types), Location: on Extended Io bus. The device is working properly, device usage - use this device (enable), No conflicts, and use automatic sttings is checked. DMA 01, i/o range 0378 -037F, i/o range 0778 - 077f for the 2 I/O ranges.
Any suggestions?
Thanks
John