Posted by Barbara Brazil on April 04, 2019 at 06:25:04:
In Reply to: Comet 2018 on Windows Server 2003 posted by Herb Walters on April 03, 2019 at 13:55:34:
Things are done a bit differently now. In the SITE section you need to define one N0x server for the security server and one for each file server you will use. Here's an example:
Server = N01,TCP,L,ServerName; Main server used for Security Server and Main File Server
Server = N02,TCP,L,220.127.116.11; Remote server used for File Server only, last parameter is the IP address
Then in each NODE section you will list the servers this node will need access to. File server types are all type "C", not type "F" anymore:
Server = N01,SC; this indicates server N01 will be used for both Security and local files
Server = N02,C; this indicates server N02 will be used for remote files
In the DIRECTORIES section there are only type "C" entries now. No more type "N" or type "S".
I know there are lots of guys out there that setup access to remote machines more than I do so please chime in here and correct me if I missed something.
Post a Followup
Each file can be a maximum of 1MB in length Uploaded files will be purged from the server on a regular basis.